English 
Tire Repair Tools
Tire Repair Reamer and Probe Shafts for Wholesale
Compare 12 AUTOWIN tire repair reamer and probe shaft entries for replacement-tool and distributor spare-part ranges. The 93-011 to 93-022 references cover different listed sections and lengths. Match the working profile, shaft-to-handle connection and required dimensions before ordering, with each model and size combination clearly identified in the purchasing specification.
Key Specifications
- Series
- Tire Reamer & Probe Shafts
- Listed configurations
- 12
- Selection
- Tool format · Available dimensions (mm) · Dimensions (in, approx.)
- Catalogue reference
- Tire Service Products, pp. 33
Product Details
A replacement tire repair reamer or probe shaft needs to match both the working task and its receiving handle. AUTOWIN lists 12 catalogue references, from 93-011 through 93-022, with diameter or section information and available length ranges. Use the model number together with the selected dimensions so the enquiry identifies a defined component rather than a generic reamer.
The table distinguishes round-size designations from rectangular sections. For example, 93-011 lists 3 mm with a 50–100 mm length range; 93-017 lists 6 mm and 93-018 lists 8 mm, each with a 75–250 mm length range. Other entries include multiple listed diameters or section pairs such as 4 × 5 mm and 5 × 2.5 mm. Preserve the slash and multiplication notation because those entries describe different selection information.
Matching dimensions does not establish identical working profiles or interchangeable handle connections. Request the mounting detail and compare the required tip or shaft profile against an existing sample or drawing. The present table also does not establish that every reference is suitable for a powered drill, so identify the intended hand-tool or equipment arrangement before approval.
For distributor replenishment, list quantities by model, selected section and length. Include the receiving-handle reference, packing unit and delivery country. This makes repeat orders easier to trace and allows alternative sizes to be quoted separately. Keep the chosen component consistent with the approved tire-repair procedure; the listed size range alone does not determine repair suitability or the amount of material to remove.
Model Differences
- 93-011: Reamer / probe profile.
- 93-017: Reamer / probe profile.
- 93-022: Reamer / probe profile.
Applications
Typical application
Maintaining tire-repair tool assemblies and distributor spare-part ranges.
Distributor and workshop orders
Specify the model mix and quantity required for your stock range. Include destination and packaging requirements so the quotation can address the intended order.
Models & Specifications
Compare specifications and select the models or size configurations for your quotation.
Swipe the table to compare all dimensions.
| Model / SKU | Tool format | Available dimensions (mm) | Dimensions (in, approx.) | Quantity (pcs) | |
|---|---|---|---|---|---|
| 93-011 | Reamer / probe profileDimensions shown as listed; confirm matching handle and profile. | Diameter / section: 3 mm; length: 50–100 mm | Diameter / section: 0.118 in; length: 1.97–3.94 in | ||
| 93-012 | Reamer / probe profileDimensions shown as listed; confirm matching handle and profile. | Diameter / section: 4 / 5 mm; length: 75–250 mm | Diameter / section: 0.157 / 0.197 in; length: 2.95–9.84 in | ||
| 93-013 | Reamer / probe profileDimensions shown as listed; confirm matching handle and profile. | Diameter / section: 4 / 5 mm; length: 75–250 mm | Diameter / section: 0.157 / 0.197 in; length: 2.95–9.84 in | ||
| 93-014 | Reamer / probe profileDimensions shown as listed; confirm matching handle and profile. | Diameter / section: 4 × 5 mm; length: 75–250 mm | Diameter / section: 0.157 × 0.197 in; length: 2.95–9.84 in | ||
| 93-015 | Reamer / probe profileDimensions shown as listed; confirm matching handle and profile. | Diameter / section: 4 / 5 / 6 mm; length: 75–100 mm | Diameter / section: 0.157 / 0.197 / 0.236 in; length: 2.95–3.94 in | ||
| 93-016 | Reamer / probe profileDimensions shown as listed; confirm matching handle and profile. | Diameter / section: 4 / 5 / 6 mm; length: 75–250 mm | Diameter / section: 0.157 / 0.197 / 0.236 in; length: 2.95–9.84 in | ||
| 93-017 | Reamer / probe profileDimensions shown as listed; confirm matching handle and profile. | Diameter / section: 6 mm; length: 75–250 mm | Diameter / section: 0.236 in; length: 2.95–9.84 in | ||
| 93-018 | Reamer / probe profileDimensions shown as listed; confirm matching handle and profile. | Diameter / section: 8 mm; length: 75–250 mm | Diameter / section: 0.315 in; length: 2.95–9.84 in | ||
| 93-019 | Reamer / probe profileDimensions shown as listed; confirm matching handle and profile. | Diameter / section: 5 × 2.5 mm; length: 75–250 mm | Diameter / section: 0.197 × 0.098 in; length: 2.95–9.84 in | ||
| 93-020 | Reamer / probe profileDimensions shown as listed; confirm matching handle and profile. | Diameter / section: 6 mm; length: 75–250 mm | Diameter / section: 0.236 in; length: 2.95–9.84 in | ||
| 93-021 | Reamer / probe profileDimensions shown as listed; confirm matching handle and profile. | Diameter / section: 4 × 5 mm; length: 75–250 mm | Diameter / section: 0.157 × 0.197 in; length: 2.95–9.84 in | ||
| 93-022 | Reamer / probe profileDimensions shown as listed; confirm matching handle and profile. | Diameter / section: 4 × 5 mm; length: 75–250 mm | Diameter / section: 0.157 × 0.197 in; length: 2.95–9.84 in |
Dimensions are catalogue values unless labelled as converted. Approximate inch conversions use 25.4 mm per inch. Thread designations remain unchanged. Read configuration notes before ordering.
Include the complete configuration and quantity for each selected model.
Frequently Asked Questions
What information identifies a replacement tire repair reamer shaft?
Provide the model reference, selected diameter or section, length and shaft-to-handle connection. Include a profile drawing or existing sample reference if the replacement must match a tool already in service.
Does 4/5 mm mean the same thing as a 4 × 5 mm section?
No. Preserve the catalogue notation in the order. A list of nominal diameters and a rectangular section pair communicate different dimensions; confirm the exact model and required form before purchasing.
Are all these shafts compatible with a drill or powered buffer?
Powered-tool compatibility is not established for every reference in this table. State the intended holder or equipment and obtain confirmation of the mounting arrangement and application. Do not select a powered-use configuration from diameter alone.
Can replacement shafts be sourced alongside a complete repair-tool set?
Yes, they can be included as separately specified enquiry items. Compare the <a href="https://autowinindustrial.com/products/tire-service-products/air-tools/pneumatic-tire-repair-tool-kits/">TP-501 pneumatic tire repair tool kit</a>, then identify the replacement shaft models and dimensions needed for your own tool assemblies.
Request a Quotation
Send the required models, quantities and packaging details.
Selected models
No models selected yet. You can also describe what you need in the form.
Your model selection will be included in Project Details.
