20–120 PSI Single-Head Tire Pressure Gauge

This tire pressure gauge pairs a single-head air chuck with a 20–120 PSI range. The listing states 2 PSI reading increments and a sliding indicator bar. For workshop replenishment or distributor stock planning, retain all three details together so the offered tool can be compared with the required range and reading format.

The range begins at 20 PSI. This reference should not be described as a low-pressure gauge below that lower limit, nor should its scale be extended to match a different model. Confirm that the tire pressures to be checked fall within the published range, using the tire or equipment manufacturer's requirements when defining the inspection task.

Review the single-head chuck against the valve position and surrounding clearance. A single-head description does not specify every angle, dimension or valve interface. Ask for a sample or drawing when replacing a known workshop gauge, and agree any material, accuracy or inspection requirements separately. The 2 PSI divisions describe the reading scale, not an accuracy guarantee or a pressure-control function.

For wholesale quotations, identify the 20–120 PSI single-head sliding-bar gauge, quantity and delivery country. Add packing units and labelling requirements, especially if the item will sit alongside dual-head or lower-pressure versions in the same catalogue. Record the approved sample reference and agreed scale details for subsequent supply. A range-and-chuck description helps the buyer distinguish this item without relying on an unsupported model number, a generic image or assumptions about another pressure gauge in the range.

Published Specifications
Product Type: Tire Pressure Gauge
Pressure Range: 20–120 PSI
Reading Increments: 2 PSI
Air Chuck: Single-head air chuck
Gauge Type: Pencil tire pressure gauge
Listed material (component not identified): Brass
Published chuck / head description: Single Head
Construction: Plated brass tube with a nylon indicator bar
Chuck Configuration: Single-head

Product FAQs
1. What are the three main published selection details?
The listing states a 20–120 PSI range, 2 PSI reading increments and a single-head air chuck. Its highlights describe a sliding indicator bar.

2. Can the gauge be specified for readings below 20 PSI?
Its stated lower limit is 20 PSI. Choose a separately listed range when the inspection requires lower readings; do not extend this product range in a purchase description.

3. Does the 2 PSI division establish measurement accuracy?
No accuracy tolerance is given. A scale increment describes spacing between readings, so request the applicable accuracy requirement and inspection evidence separately.

4. How can a buyer compare chuck configurations at this range?
The separate 20–120 PSI straight-foot dual-head gauge lists a different chuck arrangement. Compare valve access and the offered sample rather than treating equal ranges as complete product equivalence.